diff options
Diffstat (limited to 'elpa/transient-20200719.955/transient.info')
| -rw-r--r-- | elpa/transient-20200719.955/transient.info | 2442 |
1 files changed, 2442 insertions, 0 deletions
diff --git a/elpa/transient-20200719.955/transient.info b/elpa/transient-20200719.955/transient.info new file mode 100644 index 0000000..1fc0d99 --- /dev/null +++ b/elpa/transient-20200719.955/transient.info @@ -0,0 +1,2442 @@ +This is transient.info, produced by makeinfo version 6.5 from +transient.texi. + + Copyright (C) 2018-2020 Jonas Bernoulli <jonas@bernoul.li> + + You can redistribute this document and/or modify it under the terms + of the GNU General Public License as published by the Free Software + Foundation, either version 3 of the License, or (at your option) + any later version. + + This document is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + +INFO-DIR-SECTION Emacs +START-INFO-DIR-ENTRY +* Transient: (transient). Transient Commands. +END-INFO-DIR-ENTRY + + +File: transient.info, Node: Top, Next: Introduction, Up: (dir) + +Transient User and Developer Manual +*********************************** + +Taking inspiration from prefix keys and prefix arguments, Transient +implements a similar abstraction involving a prefix command, infix +arguments and suffix commands. We could call this abstraction a +"transient command", but because it always involves at least two +commands (a prefix and a suffix) we prefer to call it just a +"transient". + + When the user calls a transient prefix command, then a transient +(temporary) keymap is activated, which binds the transient’s infix and +suffix commands, and functions that control the transient state are +added to ‘pre-command-hook’ and ‘post-command-hook’. The available +suffix and infix commands and their state are shown in a popup buffer +until the transient is exited by invoking a suffix command. + + Calling an infix command causes its value to be changed, possibly by +reading a new value in the minibuffer. + + Calling a suffix command usually causes the transient to be exited +but suffix commands can also be configured to not exit the transient. + +This manual is for Transient version 0.2.0 (v0.2.0-8-gc94cff7+1). + + Copyright (C) 2018-2020 Jonas Bernoulli <jonas@bernoul.li> + + You can redistribute this document and/or modify it under the terms + of the GNU General Public License as published by the Free Software + Foundation, either version 3 of the License, or (at your option) + any later version. + + This document is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + +* Menu: + +* Introduction:: +* Usage:: +* Other Options:: +* Modifying Existing Transients:: +* Defining New Commands:: +* Classes and Methods:: +* Related Abstractions and Packages:: +* FAQ:: +* Keystroke Index:: +* Command Index:: +* Function Index:: +* Variable Index:: + +— The Detailed Node Listing — + +Usage + +* Invoking Transients:: +* Aborting and Resuming Transients:: +* Common Suffix Commands:: +* Saving Values:: +* Using History:: +* Getting Help for Suffix Commands:: +* Enabling and Disabling Suffixes:: +* Other Commands:: + +Defining New Commands + +* Defining Transients:: +* Binding Suffix and Infix Commands:: +* Defining Suffix and Infix Commands:: +* Using Infix Arguments:: +* Transient State:: + +Binding Suffix and Infix Commands + +* Group Specifications:: +* Suffix Specifications:: + + +Classes and Methods + +* Group Classes:: +* Group Methods:: +* Prefix Classes:: +* Suffix Classes:: +* Suffix Methods:: +* Prefix Slots:: +* Suffix Slots:: +* Predicate Slots:: + +Suffix Methods + +* Suffix Value Methods:: +* Suffix Format Methods:: + + +Related Abstractions and Packages + +* Comparison With Prefix Keys and Prefix Arguments:: +* Comparison With Other Packages:: + + + +File: transient.info, Node: Introduction, Next: Usage, Prev: Top, Up: Top + +1 Introduction +************** + +Taking inspiration from prefix keys and prefix arguments, Transient +implements a similar abstraction involving a prefix command, infix +arguments and suffix commands. We could call this abstraction a +"transient command", but because it always involves at least two +commands (a prefix and a suffix) we prefer to call it just a +"transient". + + Transient keymaps are a feature provided by Emacs. Transients as + implemented by this package involve the use of transient keymaps. + + Emacs provides a feature that it calls "prefix commands". When we + talk about "prefix commands" in this manual, then we mean our own + kind of "prefix commands", unless specified otherwise. To avoid + ambiguity we sometimes use the terms "transient prefix command" for + our kind and "regular prefix command" for Emacs’ kind. + + When the user calls a transient prefix command, then a transient +(temporary) keymap is activated, which binds the transient’s infix and +suffix commands, and functions that control the transient state are +added to ‘pre-command-hook’ and ‘post-command-hook’. The available +suffix and infix commands and their state are shown in a popup buffer +until the transient state is exited by invoking a suffix command. + + Calling an infix command causes its value to be changed. How that is +done depends on the type of the infix command. The simplest case is an +infix command that represents a command-line argument that does not take +a value. Invoking such an infix command causes the switch to be toggled +on or off. More complex infix commands may read a value from the user, +using the minibuffer. + + Calling a suffix command usually causes the transient to be exited; +the transient keymaps and hook functions are removed, the popup buffer +no longer shows information about the (no longer bound) suffix commands, +the values of some public global variables are set, while some internal +global variables are unset, and finally the command is actually called. +Suffix commands can also be configured to not exit the transient. + + A suffix command can, but does not have to, use the infix arguments +in much the same way it can choose to use or ignore the prefix +arguments. For a suffix command that was invoked from a transient the +variable ‘transient-current-suffixes’ and the function ‘transient-args’ +serve about the same purpose as the variables ‘prefix-arg’ and +‘current-prefix-arg’ do for any command that was called after the prefix +arguments have been set using a command such as ‘universal-argument’. + + The information shown in the popup buffer while a transient is active +looks a bit like this: + + ,----------------------------------------- + |Arguments + | -f Force (--force) + | -a Annotate (--annotate) + | + |Create + | t tag + | r release + `----------------------------------------- + + This is a simplified version of ‘magit-tag’. Info manuals do not + support images or colored text, so the above "screenshot" lacks + some information; in practice you would be able to tell whether the + arguments ‘--force’ and ‘--annotate’ are enabled or not based on + their color. + + Transient can be used to implement simple "command dispatchers". The +main benefit then is that the user can see all the available commands in +a popup buffer. That is useful by itself because it frees the user from +having to remember all the keys that are valid after a certain prefix +key or command. Magit’s ‘magit-dispatch’ command is an example of using +Transient to merely implement a command dispatcher. + + In addition to that, Transient also allows users to interactively +pass arguments to commands. These arguments can be much more complex +than what is reasonable when using prefix arguments. There is a limit +to how many aspects of a command can be controlled using prefix +arguments. Furthermore what a certain prefix argument means for +different commands can be completely different, and users have to read +documentation to learn and then commit to memory what a certain prefix +argument means to a certain command. + + Transient suffix commands on the other hand can accept dozens of +different arguments without the user having to remember anything. When +using Transient, then one can call a command with arguments that are +just as complex as when calling the same function non-interactively +using code. + + Invoking a transient command with arguments is similar to invoking a +command in a shell with command-line completion and history enabled. +One benefit of the Transient interface is that it remembers history not +only on a global level ("this command was invoked using these arguments +and previously it was invoked using those other arguments"), but also +remembers the values of individual arguments independently. See *note +Using History::. + + After a transient prefix command is invoked ‘C-h <key>’ can be used +to show the documentation for the infix or suffix command that ‘<key>’ +is bound to (see *note Getting Help for Suffix Commands::) and infixes +and suffixes can be removed from the transient using ‘C-x l <key>’. +Infixes and suffixes that are disabled by default can be enabled the +same way. See *note Enabling and Disabling Suffixes::. + + Transient ships with support for a few different types of specialized +infix commands. A command that sets a command line option for example +has different needs than a command that merely toggles a boolean flag. +Additionally Transient provides abstractions for defining new types, +which the author of Transient did not anticipate (or didn’t get around +to implementing yet). + + +File: transient.info, Node: Usage, Next: Other Options, Prev: Introduction, Up: Top + +2 Usage +******* + +* Menu: + +* Invoking Transients:: +* Aborting and Resuming Transients:: +* Common Suffix Commands:: +* Saving Values:: +* Using History:: +* Getting Help for Suffix Commands:: +* Enabling and Disabling Suffixes:: +* Other Commands:: + + +File: transient.info, Node: Invoking Transients, Next: Aborting and Resuming Transients, Up: Usage + +2.1 Invoking Transients +======================= + +A transient prefix command is invoked like any other command by pressing +the key that is bound to that command. The main difference to other +commands is that a transient prefix command activates a transient +keymap, which temporarily binds the transient’s infix and suffix +commands. Bindings from other keymaps may, or may not, be disabled +while the transient state is in effect. + + There are two kinds of commands that are available after invoking a +transient prefix command; infix and suffix commands. Infix commands set +some value (which is then shown in a popup buffer), without leaving the +transient. Suffix commands on the other hand usually quit the transient +and they may use the values set by the infix commands, i.e. the infix +*arguments*. + + Instead of setting arguments to be used by a suffix command, infix +commands may also set some value by side-effect. + + +File: transient.info, Node: Aborting and Resuming Transients, Next: Common Suffix Commands, Prev: Invoking Transients, Up: Usage + +2.2 Aborting and Resuming Transients +==================================== + +To quit the transient without invoking a suffix command press ‘C-g’. + + Key bindings in transient keymaps may be longer than a single event. +After pressing a valid prefix key, all commands whose bindings do not +begin with that prefix key are temporarily unavailable and grayed out. +To abort the prefix key press ‘C-g’ (which in this case only quits the +prefix key, but not the complete transient). + + A transient prefix command can be bound as a suffix of another +transient. Invoking such a suffix replaces the current transient state +with a new transient state, i.e. the available bindings change and the +information displayed in the popup buffer is updated accordingly. +Pressing ‘C-g’ while a nested transient is active only quits the +innermost transient, causing a return to the previous transient. + + ‘C-q’ or ‘C-z’ on the other hand always exits all transients. If you +use the latter, then you can later resume the stack of transients using +‘M-x transient-resume’. + +‘C-g’ (‘transient-quit-seq’) +‘C-g’ (‘transient-quit-one’) + + This key quits the currently active incomplete key sequence, if + any, or else the current transient. When quitting the current + transient, then it returns to the previous transient, if any. + + Transient’s predecessor bound ‘q’ instead of ‘C-g’ to the quit +command. To learn how to get that binding back see +‘transient-bind-q-to-quit’’s doc string. + +‘C-q’ (‘transient-quit-all’) + + This command quits the currently active incomplete key sequence, if + any, and all transients, including the active transient and all + suspended transients, if any. + +‘C-z’ (‘transient-suspend’) + + Like ‘transient-quit-all’, this command quits an incomplete key + sequence, if any, and all transients. Additionally it saves the + stack of transients so that it can easily be resumed (which is + particularly useful if you quickly need to do "something else" and + the stack is deeper than a single transient and/or you have already + changed the values of some infix arguments). + + Note that only a single stack of transients can be saved at a time. + If another stack is already saved, then saving a new stack discards + the previous stack. + +‘M-x transient-resume’ (‘transient-resume’) + + This command resumes the previously suspended stack of transients, + if any. + + +File: transient.info, Node: Common Suffix Commands, Next: Saving Values, Prev: Aborting and Resuming Transients, Up: Usage + +2.3 Common Suffix Commands +========================== + +A few shared suffix commands are available in all transients. These +suffix commands are not shown in the popup buffer by default. + + Most of these commands are bound to ‘C-x <key>’ and after pressing +‘C-x’ a section featuring all common commands is temporarily shown in +the popup buffer. After invoking one of these commands, that section +disappears again. Note however that one of these commands is described +as "Show common permanently"; invoke that if you want the common +commands to always be shown for all transients. + +‘C-x t’ (‘transient-toggle-common’) + + This command toggles whether the generic commands that are common + to all transients are always displayed or only after typing the + incomplete prefix key sequence ‘C-x’. This only affects the + current Emacs session. + + -- User Option: transient-show-common-commands + + This option controls whether shared suffix commands are shown + alongside the transient-specific infix and suffix commands. By + default the shared commands are not shown to avoid overwhelming the + user with to many options. + + While a transient is active, pressing ‘C-x’ always shows the common + command. The value of this option can be changed for the current + Emacs session by typing ‘C-x t’ while a transient is active. + + The other common commands are described in either the previous node +or in one of the following nodes. + + Some of Transient’s key bindings differ from the respective bindings +of Magit-Popup; see *note FAQ:: for more information. + + +File: transient.info, Node: Saving Values, Next: Using History, Prev: Common Suffix Commands, Up: Usage + +2.4 Saving Values +================= + +After setting the infix arguments in a transient, the user can save +those arguments for future invocations. + + Most transients will start out with the saved arguments when they are +invoked. There are a few exceptions though. Some transients are +designed so that the value that they use is stored externally as the +buffer-local value of some variable. Invoking such a transient again +uses the buffer-local value. (1) + + If the user does not save the value and just exits using a regular +suffix command, then the value is merely saved to the transient’s +history. That value won’t be used when the transient is next invoked +but it is easily accessible (see *note Using History::). + +‘C-x s’ (‘transient-set’) + + This command saves the value of the active transient for this Emacs + session. + +‘C-x C-s’ (‘transient-save’) + + Save the value of the active transient persistently across Emacs + sessions. + + -- User Option: transient-values-file + + This file is used to persist the values of transients between Emacs + sessions. + + ---------- Footnotes ---------- + + (1) ‘magit-diff’ and ‘magit-log’ are two prominent examples, and +their handling of buffer-local values is actually a bit more complicated +than outlined above and even customizable. This is something I am +rethinking, but I don’t want to rush any changes.) + + +File: transient.info, Node: Using History, Next: Getting Help for Suffix Commands, Prev: Saving Values, Up: Usage + +2.5 Using History +================= + +Every time the user invokes a suffix command the transient’s current +value is saved to its history. These values can be cycled through the +same way one can cycle through the history of commands that read +user-input in the minibuffer. + +‘M-p’ (‘transient-history-prev’) + + This command switches to the previous value used for the active + transient. + +‘M-n’ (‘transient-history-next’) + + This command switches to the next value used for the active + transient. + + In addition to the transient-wide history, Transient of course +supports per-infix history. When an infix reads user-input using the +minibuffer, then the user can use the regular minibuffer history +commands to cycle through previously used values. Usually the same keys +as those mentioned above are bound to those commands. + + Authors of transients should arrange for different infix commands +that read the same kind of value to also use the same history key (see +*note Suffix Slots::). + + Both kinds of history are saved to a file when Emacs is exited. + + -- User Option: transient-history-file + + This file is used to persist the history of transients and their + infixes between Emacs sessions. + + -- User Option: transient-history-limit + + This option controls how many history elements are kept at the time + the history is saved in ‘transient-history-file’. + + +File: transient.info, Node: Getting Help for Suffix Commands, Next: Enabling and Disabling Suffixes, Prev: Using History, Up: Usage + +2.6 Getting Help for Suffix Commands +==================================== + +Transients can have many suffixes and infixes that the user might not be +familiar with. To make it trivial to get help for these, Transient +provides access to the documentation directly from the active transient. + +‘C-h’ (‘transient-help’) + + This command enters help mode. When help mode is active, then + typing ‘<key>’ shows information about the suffix command that + ‘<key>’ normally is bound to (instead of invoking it). Pressing + ‘C-h’ a second time shows information about the _prefix_ command. + + After typing ‘<key>’ the stack of transient states is suspended and + information about the suffix command is shown instead. Typing ‘q’ + in the help buffer buries that buffer and resumes the transient + state. + + What sort of documentation is shown depends on how the transient was +defined. For infix commands that represent command-line arguments this +ideally shows the appropriate manpage. ‘transient-help’ then tries to +jump to the correct location within that. Info manuals are also +supported. The fallback is to show the command’s doc string, for +non-infix suffixes this is usually appropriate. + + +File: transient.info, Node: Enabling and Disabling Suffixes, Next: Other Commands, Prev: Getting Help for Suffix Commands, Up: Usage + +2.7 Enabling and Disabling Suffixes +=================================== + +The user base of a package that uses transients can be very diverse. +This is certainly the case for Magit; some users have been using it and +Git for a decade, while others are just getting started now. + + For that reason a mechanism is needed that authors can use to +classify a transient’s infixes and suffixes along the +essentials...everything spectrum. We use the term "levels" to describe +that mechanism. + + Each suffix command is placed on a level and each transient has a +level (called transient-level), which controls which suffix commands are +available. Integers between 1 and 7 (inclusive) are valid levels. For +suffixes, 0 is also valid; it means that the suffix is not displayed at +any level. + + The levels of individual transients and/or their individual suffixes +can be changed interactively, by invoking the transient and then +pressing ‘C-x l’ to enter the "edit" mode, see below. + + The default level for both transients and their suffixes is 4. The +‘transient-default-level’ option only controls the default for +transients. The default suffix level is always 4. The authors of +transients should place certain suffixes on a higher level, if they +expect that it won’t be of use to most users, and they should place very +important suffixes on a lower level, so that they remain available even +if the user lowers the transient level. + + (Magit currently places nearly all suffixes on level 4 and lower +levels are not used at all yet. So for the time being you should not +set a lower default level and using a higher level might not give you as +many additional suffixes as you hoped.) + + -- User Option: transient-default-level + + This option controls which suffix levels are made available by + default. It sets the transient-level for transients for which the + user has not set that individually. + + -- User Option: transient-levels-file + + This file is used to persist the levels of transients and their + suffixes between Emacs sessions. + +‘C-x l’ (‘transient-set-level’) + + This command enters edit mode. When edit mode is active, then all + infixes and suffixes that are currently usable are displayed along + with their levels. The colors of the levels indicate whether they + are enabled or not. The level of the transient is also displayed + along with some usage information. + + In edit mode, pressing the key that would usually invoke a certain + suffix instead prompts the user for the level that suffix should be + placed on. + + Help mode is available in edit mode. + + To change the transient level press ‘C-x l’ again. + + To exit edit mode press ‘C-g’. + + Note that edit mode does not display any suffixes that are not + currently usable. ‘magit-rebase’ for example shows different + suffixes depending on whether a rebase is already in progress or + not. The predicates also apply in edit mode. + + Therefore, to control which suffixes are available given a certain + state, you have to make sure that that state is currently active. + + +File: transient.info, Node: Other Commands, Prev: Enabling and Disabling Suffixes, Up: Usage + +2.8 Other Commands +================== + +When invoking a transient in a small frame, the transient window may not +show the complete buffer, making it necessary to scroll, using the +following commands. These commands are never shown in the transient +window, and the key bindings are the same as for ‘scroll-up-command’ and +‘scroll-down-command’ in other buffers. + + -- Command: transient-scroll-up arg + + This command scrolls text of transient popup window upward ARG + lines. If ARG is ‘nil’, then it scrolls near full screen. This is + a wrapper around ‘scroll-up-command’ (which see). + + -- Command: transient-scroll-down arg + + This command scrolls text of transient popup window down ARG lines. + If ARG is ‘nil’, then it scrolls near full screen. This is a + wrapper around ‘scroll-down-command’ (which see). + + +File: transient.info, Node: Other Options, Next: Modifying Existing Transients, Prev: Usage, Up: Top + +3 Other Options +*************** + + -- User Option: transient-show-popup + + This option controls whether the current transient’s infix and + suffix commands are shown in the popup buffer. + + • If ‘t’ (the default) then the popup buffer is shown as soon as + a transient prefix command is invoked. + + • If ‘nil’, then the popup buffer is not shown unless the user + explicitly requests it, by pressing an incomplete prefix key + sequence. + + • If a number, then the a brief one-line summary is shown + instead of the popup buffer. If zero or negative, then not + even that summary is shown; only the pressed key itself is + shown. + + The popup is shown when the user explicitly requests it by + pressing an incomplete prefix key sequence. Unless this is + zero, then the popup is shown after that many seconds of + inactivity (using the absolute value). + + -- User Option: transient-enable-popup-navigation + + This option controls whether navigation commands are enabled in the + transient popup. + + While a transient is active the transient popup buffer is not the + current buffer, making it necessary to use dedicated commands to + act on that buffer itself. This is disabled by default. If this + option is non-nil, then the following features are available: + + • ‘<up>’ moves the cursor to the previous suffix. ‘<down>’ + moves the cursor to the next suffix. ‘RET’ invokes the suffix + the cursor is on. + + • ‘<mouse-1>’ invokes the clicked on suffix. + + • ‘C-s’ and ‘C-r’ start isearch in the popup buffer. + + -- User Option: transient-display-buffer-action + + This option specifies the action used to display the transient + popup buffer. The transient popup buffer is displayed in a window + using ‘(display-buffer buf transient-display-buffer-action)’. + + The value of this option has the form ‘(FUNCTION . ALIST)’, where + FUNCTION is a function or a list of functions. Each such function + should accept two arguments: a buffer to display and an alist of + the same form as ALIST. See *note (elisp)Choosing Window::. + + The default is ‘(display-buffer-in-side-window (side . bottom))’. + This displays the window at the bottom of the selected frame. + Another useful value is ‘(display-buffer-below-selected)’. This is + what ‘magit-popup’ used by default. For more alternatives see + *note (elisp)Display Action Functions::. + + It may be possible to display the window in another frame, but + whether that works in practice depends on the window-manager. If + the window manager selects the new window (Emacs frame), then it + doesn’t work. + + If you change the value of this option, then you might also want to + change the value of ‘transient-mode-line-format’. + + -- User Option: transient-mode-line-format + + This option controls whether the transient popup buffer has a + mode-line, separator line, or neither. + + If ‘nil’, then the buffer has no mode-line. If the buffer is not + displayed right above the echo area, then this probably is not a + good value. + + If ‘line’ (the default), then the buffer also has no mode-line, but + a thin line is drawn instead, using the background color of the + face ‘transient-separator’. Termcap frames cannot display thin + lines and therefore fallback to treating ‘line’ like ‘nil’. + + Otherwise this can be any mode-line format. See *note (elisp)Mode + Line Format:: for details. + + -- User Option: transient-read-with-initial-input + + This option controls whether the last history element is used as + the initial minibuffer input when reading the value of an infix + argument from the user. If ‘nil’, then there is no initial input + and the first element has to be accessed the same way as the older + elements. + + -- User Option: transient-highlight-mismatched-keys + + This option controls whether key bindings of infix commands that do + not match the respective command-line argument should be + highlighted. For other infix commands this option has no effect. + + When this option is non-nil, then the key binding for an infix + argument is highlighted when only a long argument (e.g. + ‘--verbose’) is specified but no shorthand (e.g ‘-v’). In the rare + case that a shorthand is specified but the key binding does not + match, then it is highlighted differently. + + Highlighting mismatched key bindings is useful when learning the + arguments of the underlying command-line tool; you wouldn’t want to + learn any short-hands that do not actually exist. + + The highlighting is done using one of the faces + ‘transient-mismatched-key’ and ‘transient-nonstandard-key’. + + -- User Option: transient-substitute-key-function + + This function is used to modify key bindings. If the value of this + option is nil (the default), then no substitution is performed. + + This function is called with one argument, the prefix object, and + must return a key binding description, either the existing key + description it finds in the ‘key’ slot, or the key description that + replaces the prefix key. It could be used to make other + substitutions, but that is discouraged. + + For example, ‘=’ is hard to reach using my custom keyboard layout, + so I substitute ‘(’ for that, which is easy to reach using a layout + optimized for lisp. + + (setq transient-substitute-key-function + (lambda (obj) + (let ((key (oref obj key))) + (if (string-match "\\`\\(=\\)[a-zA-Z]" key) + (replace-match "(" t t key 1) + key)))) + + -- User Option: transient-detect-key-conflicts + + This option controls whether key binding conflicts should be + detected at the time the transient is invoked. If so, then this + results in an error, which prevents the transient from being used. + Because of that, conflicts are ignored by default. + + Conflicts cannot be determined earlier, i.e. when the transient is + being defined and when new suffixes are being added, because at + that time there can be false-positives. It is actually valid for + multiple suffixes to share a common key binding, provided the + predicates of those suffixes prevent that more than one of them is + enabled at a time. + + -- User Option: transient-force-fixed-pitch + + This option controls whether to force the use of a monospaced font + in popup buffer. Even if you use a proportional font for the + ‘default’ face, you might still want to use a monospaced font in + transient’s popup buffer. Setting this option to t causes + ‘default’ to be remapped to ‘fixed-pitch’ in that buffer. + + +File: transient.info, Node: Modifying Existing Transients, Next: Defining New Commands, Prev: Other Options, Up: Top + +4 Modifying Existing Transients +******************************* + +To an extent transients can be customized interactively, see *note +Enabling and Disabling Suffixes::. This section explains how existing +transients can be further modified non-interactively. + + The following functions share a few arguments: + + • PREFIX is a transient prefix command, a symbol. + + • SUFFIX is a transient infix or suffix specification in the same + form as expected by ‘transient-define-prefix’. Note that an infix + is a special kind of suffix. Depending on context "suffixes" means + "suffixes (including infixes)" or "non-infix suffixes". Here it + means the former. See *note Suffix Specifications::. + + SUFFIX may also be a group in the same form as expected by + ‘transient-define-prefix’. See *note Group Specifications::. + + • LOC is a command, a key vector, a key description (a string as + returned by ‘key-description’), or a list specifying coordinates + (the last element may also be a command or key). For example ‘(1 0 + -1)’ identifies the last suffix (‘-1’) of the first subgroup (‘0’) + of the second group (‘1’). + + If LOC is a list of coordinates, then it can be used to identify a + group, not just an individual suffix command. + + The function ‘transient-get-suffix’ can be useful to determine + whether a certain coordination list identifies the suffix or group + that you expect it to identify. In hairy cases it may be necessary + to look at the definition of the transient prefix command. + + These functions operate on the information stored in the +‘transient--layout’ property of the PREFIX symbol. Suffix entries in +that tree are not objects but have the form ‘(LEVEL CLASS PLIST)’, where +plist should set at least ‘:key’, ‘:description’ and ‘:command’. + + -- Function: transient-insert-suffix prefix loc suffix + + This function inserts suffix or group SUFFIX into PREFIX before + LOC. + + -- Function: transient-append-suffix prefix loc suffix + + This function inserts suffix or group SUFFIX into PREFIX after LOC. + + -- Function: transient-replace-suffix prefix loc suffix + + This function replaces the suffix or group at LOC in PREFIX with + suffix or group SUFFIX. + + -- Function: transient-remove-suffix prefix loc + + This function removes the suffix or group at LOC in PREFIX. + + -- Function: transient-get-suffix prefix loc + + This function returns the suffix or group at LOC in PREFIX. The + returned value has the form mentioned above. + + -- Function: transient-suffix-put prefix loc prop value + + This function edits the suffix or group at LOC in PREFIX, by + setting the PROP of its plist to VALUE. + + Most of these functions do not signal an error if they cannot perform +the requested modification. The functions that insert new suffixes show +a warning if LOC cannot be found in PREFIX, without signaling an error. +The reason for doing it like this is that establishing a key binding +(and that is what we essentially are trying to do here) should not +prevent the rest of the configuration from loading. Among these +functions only ‘transient-get-suffix’ and ‘transient-suffix-put’ may +signal an error. + + +File: transient.info, Node: Defining New Commands, Next: Classes and Methods, Prev: Modifying Existing Transients, Up: Top + +5 Defining New Commands +*********************** + +* Menu: + +* Defining Transients:: +* Binding Suffix and Infix Commands:: +* Defining Suffix and Infix Commands:: +* Using Infix Arguments:: +* Transient State:: + + +File: transient.info, Node: Defining Transients, Next: Binding Suffix and Infix Commands, Up: Defining New Commands + +5.1 Defining Transients +======================= + +A transient consists of a prefix command and at least one suffix +command, though usually a transient has several infix and suffix +commands. The below macro defines the transient prefix command *and* +binds the transient’s infix and suffix commands. In other words, it +defines the complete transient, not just the transient prefix command +that is used to invoke that transient. + + -- Macro: transient-define-prefix name arglist [docstring] [keyword + value]... group... [body...] + + This macro defines NAME as a transient prefix command and binds the + transient’s infix and suffix commands. + + ARGLIST are the arguments that the prefix command takes. DOCSTRING + is the documentation string and is optional. + + These arguments can optionally be followed by keyword-value pairs. + Each key has to be a keyword symbol, either ‘:class’ or a keyword + argument supported by the constructor of that class. The + ‘transient-prefix’ class is used if the class is not specified + explicitly. + + GROUPs add key bindings for infix and suffix commands and specify + how these bindings are presented in the popup buffer. At least one + GROUP has to be specified. See *note Binding Suffix and Infix + Commands::. + + The BODY is optional. If it is omitted, then ARGLIST is ignored + and the function definition becomes: + + (lambda () + (interactive) + (transient-setup 'NAME)) + + If BODY is specified, then it must begin with an ‘interactive’ form + that matches ARGLIST, and it must call ‘transient-setup’. It may + however call that function only when some condition is satisfied. + + All transients have a (possibly ‘nil’) value, which is exported + when suffix commands are called, so that they can consume that + value. For some transients it might be necessary to have a sort of + secondary value, called a "scope". Such a scope would usually be + set in the command’s ‘interactive’ form and has to be passed to the + setup function: + + (transient-setup 'NAME nil nil :scope SCOPE) + + For example, the scope of the ‘magit-branch-configure’ transient is + the branch whose variables are being configured. + + +File: transient.info, Node: Binding Suffix and Infix Commands, Next: Defining Suffix and Infix Commands, Prev: Defining Transients, Up: Defining New Commands + +5.2 Binding Suffix and Infix Commands +===================================== + +The macro ‘transient-define-prefix’ is used to define a transient. This +defines the actual transient prefix command (see *note Defining +Transients::) and adds the transient’s infix and suffix bindings, as +described below. + + Users and third-party packages can add additional bindings using +functions such as ‘transient-insert-suffix’ (See *note Modifying +Existing Transients::). These functions take a "suffix specification" +as one of their arguments, which has the same form as the specifications +used in ‘transient-define-prefix’. + +* Menu: + +* Group Specifications:: +* Suffix Specifications:: + + +File: transient.info, Node: Group Specifications, Next: Suffix Specifications, Up: Binding Suffix and Infix Commands + +5.2.1 Group Specifications +-------------------------- + +The suffix and infix commands of a transient are organized in groups. +The grouping controls how the descriptions of the suffixes are outlined +visually but also makes it possible to set certain properties for a set +of suffixes. + + Several group classes exist, some of which organize suffixes in +subgroups. In most cases the class does not have to be specified +explicitly, but see *note Group Classes::. + + Groups are specified in the call to ‘transient-define-prefix’, using +vectors. Because groups are represented using vectors, we cannot use +square brackets to indicate an optional element and instead use curly +brackets to do the latter. + + Group specifications then have this form: + + [{LEVEL} {DESCRIPTION} {KEYWORD VALUE}... ELEMENT...] + + The LEVEL is optional and defaults to 4. See *note Enabling and +Disabling Suffixes::. + + The DESCRIPTION is optional. If present it is used as the heading of +the group. + + The KEYWORD-VALUE pairs are optional. Each keyword has to be a +keyword symbol, either ‘:class’ or a keyword argument supported by the +constructor of that class. + + • One of these keywords, ‘:description’, is equivalent to specifying + DESCRIPTION at the very beginning of the vector. The + recommendation is to use ‘:description’ if some other keyword is + also used, for consistency, or DESCRIPTION otherwise, because it + looks better. + + • Likewise ‘:level’ is equivalent to LEVEL. + + • Other important keywords include the ‘:if...’ keywords. These + keywords control whether the group is available in a certain + situation. + + For example, one group of the ‘magit-rebase’ transient uses ‘:if + magit-rebase-in-progress-p’, which contains the suffixes that are + useful while rebase is already in progress; and another that uses + ‘:if-not magit-rebase-in-progress-p’, which contains the suffixes + that initiate a rebase. + + These predicates can also be used on individual suffixes and are + only documented once, see *note Predicate Slots::. + + • Finally the value of ‘:hide’, if non-nil, is a predicate that + controls whether the group is hidden by default. The key bindings + for suffixes of a hidden group should all use the same prefix key. + Pressing that prefix key should temporarily show the group and its + suffixes, which assumes that a predicate like this is used: + + (lambda () + (eq (car transient--redisplay-key) + ?\C-c)) ; the prefix key shared by all bindings + + The ELEMENTs are either all subgroups (vectors), or all suffixes +(lists) and strings. (At least currently no group type exists that +would allow mixing subgroups with commands at the same level, though in +principle there is nothing that prevents that.) + + If the ELEMENTs are not subgroups, then they can be a mixture of +lists that specify commands and strings. Strings are inserted verbatim. +The empty string can be used to insert gaps between suffixes, which is +particularly useful if the suffixes are outlined as a table. + + The form of suffix specifications is documented in the next node. + + +File: transient.info, Node: Suffix Specifications, Prev: Group Specifications, Up: Binding Suffix and Infix Commands + +5.2.2 Suffix Specifications +--------------------------- + +A transient’s suffix and infix commands are bound when the transient +prefix command is defined using ‘transient-define-prefix’, see *note +Defining Transients::. The commands are organized into groups, see +*note Group Specifications::. Here we describe the form used to bind an +individual suffix command. + + The same form is also used when later binding additional commands +using functions such as ‘transient-insert-suffix’, see *note Modifying +Existing Transients::. + + Note that an infix is a special kind of suffix. Depending on context +"suffixes" means "suffixes (including infixes)" or "non-infix suffixes". +Here it means the former. + + Suffix specifications have this form: + + ([LEVEL] [KEY] [DESCRIPTION] COMMAND|ARGUMENT [KEYWORD VALUE]...) + + LEVEL, KEY and DESCRIPTION can also be specified using the KEYWORDs +‘:level’, ‘:key’ and ‘:description’. If the object that is associated +with COMMAND sets these properties, then they do not have to be +specified here. You can however specify them here anyway, possibly +overriding the object’s values just for the binding inside this +transient. + + • LEVEL is the suffix level, an integer between 1 and 7. See *note + Enabling and Disabling Suffixes::. + + • KEY is the key binding, either a vector or key description string. + + • DESCRIPTION is the description, either a string or a function that + returns a string. The function should be a lambda expression to + avoid ambiguity. In some cases a symbol that is bound as a + function would also work but to be safe you should use + ‘:description’ in that case. + + The next element is either a command or an argument. This is the +only argument that is mandatory in all cases. + + • COMMAND is a symbol that is bound as a function, which has to be a + command. Any command will do; it does not need to have an object + associated with it (as would be the case if + ‘transient-define-suffix’ or ‘transient-define-infix’ were used to + define it). + + As mentioned above, the object that is associated with a command + can be used to set the default for certain values that otherwise + have to be set in the suffix specification. Therefore if there is + no object, then you have to make sure to specify the KEY and the + DESCRIPTION. + + • The mandatory argument can also be a command-line argument, a + string. In that case an anonymous command is defined and bound. + + Instead of a string, this can also be a list of two strings, in + which case the first string is used as the short argument (which + can also be specified using ‘:shortarg’) and the second as the long + argument (which can also be specified using ‘:argument’). + + Only the long argument is displayed in the popup buffer. See + ‘transient-detect-key-conflicts’ for how the short argument may be + used. + + Unless the class is specified explicitly, the appropriate class is + guessed based on the long argument. If the argument ends with "=" + (e.g. "–format=") then ‘transient-option’ is used, otherwise + ‘transient-switch’. + + Finally, details can be specified using optional KEYWORD-VALUE pairs. +Each keyword has to be a keyword symbol, either ‘:class’ or a keyword +argument supported by the constructor of that class. See *note Suffix +Slots::. + + +File: transient.info, Node: Defining Suffix and Infix Commands, Next: Using Infix Arguments, Prev: Binding Suffix and Infix Commands, Up: Defining New Commands + +5.3 Defining Suffix and Infix Commands +====================================== + +Note that an infix is a special kind of suffix. Depending on context +"suffixes" means "suffixes (including infixes)" or "non-infix suffixes". + + -- Macro: transient-define-suffix name arglist [docstring] [keyword + value]... body... + + This macro defines NAME as a transient suffix command. + + ARGLIST are the arguments that the command takes. DOCSTRING is the + documentation string and is optional. + + These arguments can optionally be followed by keyword-value pairs. + Each keyword has to be a keyword symbol, either ‘:class’ or a + keyword argument supported by the constructor of that class. The + ‘transient-suffix’ class is used if the class is not specified + explicitly. + + The BODY must begin with an ‘interactive’ form that matches + ARGLIST. The infix arguments are usually accessed by using + ‘transient-args’ inside ‘interactive’. + + -- Macro: transient-define-infix name arglist [docstring] [keyword + value]... + + This macro defines NAME as a transient infix command. + + ARGLIST is always ignored (but mandatory never-the-less) and + reserved for future use. DOCSTRING is the documentation string and + is optional. + + The keyword-value pairs are mandatory. All transient infix + commands are ‘equal’ to each other (but not ‘eq’), so it is + meaningless to define an infix command without also setting at + least ‘:class’ and one other keyword (which it is depends on the + used class, usually ‘:argument’ or ‘:variable’). + + Each keyword has to be a keyword symbol, either ‘:class’ or a + keyword argument supported by the constructor of that class. The + ‘transient-switch’ class is used if the class is not specified + explicitly. + + The function definition is always: + + (lambda () + (interactive) + (let ((obj (transient-suffix-object))) + (transient-infix-set obj (transient-infix-read obj))) + (transient--show)) + + ‘transient-infix-read’ and ‘transient-infix-set’ are generic + functions. Different infix commands behave differently because the + concrete methods are different for different infix command classes. + In rare cases the above command function might not be suitable, + even if you define your own infix command class. In that case you + have to use ‘transient-suffix-command’ to define the infix command + and use ‘t’ as the value of the ‘:transient’ keyword. + + -- Macro: transient-define-argument name arglist [docstring] [keyword + value]... + + This macro defines NAME as a transient infix command. + + This is an alias for ‘transient-define-infix’. Only use this alias + to define an infix command that actually sets an infix argument. + To define an infix command that, for example, sets a variable, use + ‘transient-define-infix’ instead. + + +File: transient.info, Node: Using Infix Arguments, Next: Transient State, Prev: Defining Suffix and Infix Commands, Up: Defining New Commands + +5.4 Using Infix Arguments +========================= + +The function and the variables described below allow suffix commands to +access the value of the transient from which they were invoked; which is +the value of its infix arguments. These variables are set when the user +invokes a suffix command that exits the transient, but before actually +calling the command. + + When returning to the command-loop after calling the suffix command, +the arguments are reset to ‘nil’ (which causes the function to return +‘nil’ too). + + Like for Emacs’ prefix arguments it is advisable, but not mandatory, +to access the infix arguments inside the command’s ‘interactive’ form. +The preferred way of doing that is to call the ‘transient-args’ +function, which for infix arguments serves about the same purpose as +‘prefix-arg’ serves for prefix arguments. + + -- Function: transient-args &optional prefix + + This function returns the value of the transient prefix command + PREFIX. + + If the current command was invoked from the transient prefix + command PREFIX, then it returns the active infix arguments. If the + current command was not invoked from PREFIX, then it returns the + set, saved or default value for PREFIX. + + -- Variable: transient-current-suffixes + + The suffixes of the transient from which this suffix command was + invoked. This is a list of objects. Usually it is sufficient to + instead use the function ‘transient-args’, which returns a list of + values. In complex cases it might be necessary to use this + variable instead, i.e. if you need access to information beside + the value. + + -- Variable: transient-current-prefix + + The transient from which this suffix command was invoked. The + returned value is a ‘transient-prefix’ object, which holds + information associated with the transient prefix command. + + -- Variable: transient-current-command + + The transient from which this suffix command was invoked. The + returned value is a symbol, the transient prefix command. + + +File: transient.info, Node: Transient State, Prev: Using Infix Arguments, Up: Defining New Commands + +5.5 Transient State +=================== + +Invoking a transient prefix command "activates" the respective +transient, i.e. it puts a transient keymap into effect, which binds the +transient’s infix and suffix commands. + + The default behavior while a transient is active is as follows: + + • Invoking an infix command does not affect the transient state; the + transient remains active. + + • Invoking a (non-infix) suffix command "deactivates" the transient + state by removing the transient keymap and performing some + additional cleanup. + + • Invoking a command that is bound in a keymap other than the + transient keymap is disallowed and trying to do so results in a + warning. This does not "deactivate" the transient. + + But these are just the defaults. Whether a certain command +deactivates or "exits" the transient is configurable. There is more +than one way in which a command can be "transient" or "non-transient"; +the exact behavior is implemented by calling a so-called "pre-command" +function. Whether non-suffix commands are allowed to be called is +configurable per transient. + + • The transient-ness of suffix commands (including infix commands) is + controlled by the value of their ‘transient’ slot, which can be set + either when defining the command or when adding a binding to a + transient while defining the respective transient prefix command. + + Valid values are booleans and the pre-commands described below. + + • ‘t’ is equivalent to ‘transient--do-stay’. + + • ‘nil’ is equivalent to ‘transient--do-exit’. + + • If ‘transient’ is unbound (and that is actually the default + for non-infix suffixes) then the value of the prefix’s + ‘transient-suffix’ slot is used instead. The default value of + that slot is ‘nil’, so the suffix’s ‘transient’ slot being + unbound is essentially equivalent to it being ‘nil’. + + • A suffix command can be a prefix command itself, i.e. a + "sub-prefix". While a sub-prefix is active we nearly always want + ‘C-g’ to take the user back to the "super-prefix". However in rare + cases this may not be desirable, and that makes the following + complication necessary: + + For ‘transient-suffix’ objects the ‘transient’ slot is unbound. We + can ignore that for the most part because, as stated above, ‘nil’ + and the slot being unbound are equivalent, and mean "do exit". + That isn’t actually true for suffixes that are sub-prefixes though. + For such suffixes unbound means "do exit but allow going back", + which is the default, while ‘nil’ means "do exit permanently", + which requires that slot to be explicitly set to that value. + + • The transient-ness of certain built-in suffix commands is specified + using ‘transient-predicate-map’. This is a special keymap, which + binds commands to pre-commands (as opposed to keys to commands) and + takes precedence over the ‘transient’ slot. + + The available pre-command functions are documented below. They are +called by ‘transient--pre-command’, a function on ‘pre-command-hook’ and +the value that they return determines whether the transient is exited. +To do so the value of one of the constants ‘transient--exit’ or +‘transient--stay’ is used (that way we don’t have to remember if ‘t’ +means "exit" or "stay"). + + Additionally these functions may change the value of ‘this-command’ +(which explains why they have to be called using ‘pre-command-hook’), +call ‘transient-export’, ‘transient--stack-zap’ or +‘transient--stack-push’; and set the values of ‘transient--exitp’, +‘transient--helpp’ or ‘transient--editp’. + +5.5.1 Pre-commands for Infixes +------------------------------ + +The default for infixes is ‘transient--do-stay’. This is also the only +function that makes sense for infixes. + + -- Function: transient--do-stay + + Call the command without exporting variables and stay transient. + +5.5.2 Pre-commands for Suffixes +------------------------------- + +The default for suffixes is ‘transient--do-exit’. + + -- Function: transient--do-exit + + Call the command after exporting variables and exit the transient. + + -- Function: transient--do-call + + Call the command after exporting variables and stay transient. + + -- Function: transient--do-replace + + Call the transient prefix command, replacing the active transient. + + This is used for suffixes that are prefixes themselves, i.e. for + sub-prefixes. + +5.5.3 Pre-commands for Non-Suffixes +----------------------------------- + +The default for non-suffixes, i.e commands that are bound in other +keymaps beside the transient keymap, is ‘transient--do-warn’. Silently +ignoring the user-error is also an option, though probably not a good +one. + + If you want to let the user invoke non-suffix commands, then use +‘transient--do-stay’ as the value of the prefix’s ‘transient-non-suffix’ +slot. + + -- Function: transient--do-warn + + Call ‘transient-undefined’ and stay transient. + + -- Function: transient--do-noop + + Call ‘transient-noop’ and stay transient. + +5.5.4 Special Pre-Commands +-------------------------- + + -- Function: transient--do-quit-one + + If active, quit help or edit mode, else exit the active transient. + + This is used when the user pressed ‘C-g’. + + -- Function: transient--do-quit-all + + Exit all transients without saving the transient stack. + + This is used when the user pressed ‘C-q’. + + -- Function: transient--do-suspend + + Suspend the active transient, saving the transient stack. + + This is used when the user pressed ‘C-z’. + + +File: transient.info, Node: Classes and Methods, Next: Related Abstractions and Packages, Prev: Defining New Commands, Up: Top + +6 Classes and Methods +********************* + +Transient uses classes and generic functions to make it possible to +define new types of suffix commands that are similar to existing types, +but behave differently in some aspects. It does the same for groups and +prefix commands, though at least for prefix commands that *currently* +appears to be less important. + + Every prefix, infix and suffix command is associated with an object, +which holds information that controls certain aspects of its behavior. +This happens in two ways. + + • Associating a command with a certain class gives the command a + type. This makes it possible to use generic functions to do + certain things that have to be done differently depending on what + type of command it acts on. + + That in turn makes it possible for third-parties to add new types + without having to convince the maintainer of Transient that that + new type is important enough to justify adding a special case to a + dozen or so functions. + + • Associating a command with an object makes it possible to easily + store information that is specific to that particular command. + + Two commands may have the same type, but obviously their key + bindings and descriptions still have to be different, for example. + + The values of some slots are functions. The ‘reader’ slot for + example holds a function that is used to read a new value for an + infix command. The values of such slots are regular functions. + + Generic functions are used when a function should do something + different based on the type of the command, i.e. when all commands + of a certain type should behave the same way but different from the + behavior for other types. Object slots that hold a regular + function as value are used when the task that they perform is + likely to differ even between different commands of the same type. + +* Menu: + +* Group Classes:: +* Group Methods:: +* Prefix Classes:: +* Suffix Classes:: +* Suffix Methods:: +* Prefix Slots:: +* Suffix Slots:: +* Predicate Slots:: + + +File: transient.info, Node: Group Classes, Next: Group Methods, Up: Classes and Methods + +6.1 Group Classes +================= + +The type of a group can be specified using the ‘:class’ property at the +beginning of the class specification, e.g. ‘[:class transient-columns +...]’ in a call to ‘transient-define-prefix’. + + • The abstract ‘transient-child’ class is the base class of both + ‘transient-group’ (and therefore all groups) as well as of + ‘transient-suffix’ (and therefore all suffix and infix commands). + + This class exists because the elements (aka "children") of certain + groups can be other groups instead of suffix and infix commands. + + • The abstract ‘transient-group’ class is the superclass of all other + group classes. + + • The ‘transient-column’ class is the simplest group. + + This is the default "flat" group. If the class is not specified + explicitly and the first element is not a vector (i.e. not a + group), then this class is used. + + This class displays each element on a separate line. + + • The ‘transient-row’ class displays all elements on a single line. + + • The ‘transient-columns’ class displays commands organized in + columns. + + Direct elements have to be groups whose elements have to be + commands or strings. Each subgroup represents a column. This + class takes care of inserting the subgroups’ elements. + + This is the default "nested" group. If the class is not specified + explicitly and the first element is a vector (i.e. a group), then + this class is used. + + • The ‘transient-subgroups’ class wraps other groups. + + Direct elements have to be groups whose elements have to be + commands or strings. This group inserts an empty line between + subgroups. The subgroups themselves are responsible for displaying + their elements. + + +File: transient.info, Node: Group Methods, Next: Prefix Classes, Prev: Group Classes, Up: Classes and Methods + +6.2 Group Methods +================= + + -- Function: transient--insert-group group + + This generic function formats the group and its elements and + inserts the result into the current buffer, which is a temporary + buffer. The contents of that buffer are later inserted into the + popup buffer. + + Functions that are called by this function may need to operate in + the buffer from which the transient was called. To do so they can + temporarily make the ‘transient--source-buffer’ the current buffer. + + +File: transient.info, Node: Prefix Classes, Next: Suffix Classes, Prev: Group Methods, Up: Classes and Methods + +6.3 Prefix Classes +================== + +Currently the ‘transient-prefix’ class is being used for all prefix +commands and there is only a single generic function that can be +specialized based on the class of a prefix command. + + -- Function: transient--history-init obj + + This generic function is called while setting up the transient and + is responsible for initializing the ‘history’ slot. This is the + transient-wide history; many individual infixes also have a history + of their own. + + The default (and currently only) method extracts the value from the + global variable ‘transient-history’. + + A transient prefix command’s object is stored in the +‘transient--prefix’ property of the command symbol. While a transient +is active, a clone of that object is stored in the variable +‘transient--prefix’. A clone is used because some changes that are made +to the active transient’s object should not affect later invocations. + + +File: transient.info, Node: Suffix Classes, Next: Suffix Methods, Prev: Prefix Classes, Up: Classes and Methods + +6.4 Suffix Classes +================== + + • All suffix and infix classes derive from ‘transient-suffix’, which + in turn derives from ‘transient-child’, from which + ‘transient-group’ also derives (see *note Group Classes::). + + • All infix classes derive from the abstract ‘transient-infix’ class, + which in turn derives from the ‘transient-suffix’ class. + + Infixes are a special type of suffixes. The primary difference is + that infixes always use the ‘transient--do-stay’ pre-command, while + non-infix suffixes use a variety of pre-commands (see *note + Transient State::). Doing that is most easily achieved by using + this class, though theoretically it would be possible to define an + infix class that does not do so. If you do that then you get to + implement many methods. + + Also, infixes and non-infix suffixes are usually defined using + different macros (see *note Defining Suffix and Infix Commands::). + + • Classes used for infix commands that represent arguments should be + derived from the abstract ‘transient-argument’ class. + + • The ‘transient-switch’ class (or a derived class) is used for infix + arguments that represent command-line switches (arguments that do + not take a value). + + • The ‘transient-option’ class (or a derived class) is used for infix + arguments that represent command-line options (arguments that do + take a value). + + • The ‘transient-switches’ class can be used for a set of mutually + exclusive command-line switches. + + • The ‘transient-files’ class can be used for a "–" argument that + indicates that all remaining arguments are files. + + • Classes used for infix commands that represent variables should + derived from the abstract ‘transient-variables’ class. + + Magit defines additional classes, which can serve as examples for the +fancy things you can do without modifying Transient. Some of these +classes will likely get generalized and added to Transient. For now +they are very much subject to change and not documented. + + +File: transient.info, Node: Suffix Methods, Next: Prefix Slots, Prev: Suffix Classes, Up: Classes and Methods + +6.5 Suffix Methods +================== + +To get information about the methods implementing these generic +functions use ‘describe-function’. + +* Menu: + +* Suffix Value Methods:: +* Suffix Format Methods:: + + +File: transient.info, Node: Suffix Value Methods, Next: Suffix Format Methods, Up: Suffix Methods + +6.5.1 Suffix Value Methods +-------------------------- + + -- Function: transient-init-value obj + + This generic function sets the initial value of the object OBJ. + + This function is called for all suffix commands, but unless a + concrete method is implemented this falls through to the default + implementation, which is a noop. In other words this usually only + does something for infix commands, but note that this is not + implemented for the abstract class ‘transient-infix’, so if your + class derives from that directly, then you must implement a method. + + -- Function: transient-infix-read obj + + This generic function determines the new value of the infix object + OBJ. + + This function merely determines the value; ‘transient-infix-set’ is + used to actually store the new value in the object. + + For most infix classes this is done by reading a value from the + user using the reader specified by the ‘reader’ slot (using the + ‘transient-infix-value’ method described below). + + For some infix classes the value is changed without reading + anything in the minibuffer, i.e. the mere act of invoking the + infix command determines what the new value should be, based on the + previous value. + + -- Function: transient-prompt obj + + This generic function returns the prompt to be used to read infix + object OBJ’s value. + + -- Function: transient-infix-set obj value + + This generic function sets the value of infix object OBJ to VALUE. + + -- Function: transient-infix-value obj + + This generic function returns the value of the suffix object OBJ. + + This function is called by ‘transient-args’ (which see), meaning + this function is how the value of a transient is determined so that + the invoked suffix command can use it. + + Currently most values are strings, but that is not set in stone. + ‘nil’ is not a value, it means "no value". + + Usually only infixes have a value, but see the method for + ‘transient-suffix’. + + -- Function: transient-init-scope obj + + This generic function sets the scope of the suffix object OBJ. + + The scope is actually a property of the transient prefix, not of + individual suffixes. However it is possible to invoke a suffix + command directly instead of from a transient. In that case, if the + suffix expects a scope, then it has to determine that itself and + store it in its ‘scope’ slot. + + This function is called for all suffix commands, but unless a + concrete method is implemented this falls through to the default + implementation, which is a noop. + + +File: transient.info, Node: Suffix Format Methods, Prev: Suffix Value Methods, Up: Suffix Methods + +6.5.2 Suffix Format Methods +--------------------------- + + -- Function: transient-format obj + + This generic function formats and returns OBJ for display. + + When this function is called, then the current buffer is some + temporary buffer. If you need the buffer from which the prefix + command was invoked to be current, then do so by temporarily making + ‘transient--source-buffer’ current. + + -- Function: transient-format-key obj + + This generic function formats OBJ’s ‘key’ for display and returns + the result. + + -- Function: transient-format-description obj + + This generic function formats OBJ’s ‘description’ for display and + returns the result. + + -- Function: transient-format-value obj + + This generic function formats OBJ’s value for display and returns + the result. + + -- Function: transient-show-help obj + + Show help for the prefix, infix or suffix command represented by + OBJ. + + For prefixes, show the info manual, if that is specified using the + ‘info-manual’ slot. Otherwise show the manpage if that is + specified using the ‘man-page’ slot. Otherwise show the command’s + doc string. + + For suffixes, show the command’s doc string. + + For infixes, show the manpage if that is specified. Otherwise show + the command’s doc string. + + +File: transient.info, Node: Prefix Slots, Next: Suffix Slots, Prev: Suffix Methods, Up: Classes and Methods + +6.6 Prefix Slots +================ + + • ‘man-page’ or ‘info-manual’ can be used to specify the + documentation for the prefix and its suffixes. The command + ‘transient-help’ uses the method ‘transient-show-help’ (which see) + to lookup and use these values. + + • ‘history-key’ If multiple prefix commands should share a single + value, then this slot has to be set to the same value for all of + them. You probably don’t want that. + + • ‘transient-suffix’ and ‘transient-non-suffix’ play a part when + determining whether the currently active transient prefix command + remains active/transient when a suffix or abitrary non-suffix + command is invoked. See *note Transient State::. + + • ‘incompatible’ A list of lists. Each sub-list specifies a set of + mutually exclusive arguments. Enabling one of these arguments + causes the others to be disabled. + + • ‘scope’ For some transients it might be necessary to have a sort of + secondary value, called a "scope". See ‘transient-define-prefix’. + +6.6.1 Internal Prefix Slots +--------------------------- + +These slots are mostly intended for internal use. They should not be +set in calls to ‘transient-define-prefix’. + + • ‘prototype’ When a transient prefix command is invoked, then a + clone of that object is stored in the global variable + ‘transient--prefix’ and the prototype is stored in the clone’s + ‘prototype’ slot. + + • ‘command’ The command, a symbol. Each transient prefix command + consists of a command, which is stored in a symbol’s function slot + and an object, which is stored in the ‘transient--prefix’ property + of the same symbol. + + • ‘level’ The level of the prefix commands. The suffix commands + whose layer is equal or lower are displayed. See *note Enabling + and Disabling Suffixes::. + + • ‘value’ The likely outdated value of the prefix. Instead of + accessing this slot directly you should use the function + ‘transient-get-value’, which is guaranteed to return the up-to-date + value. + + • ‘history’ and ‘history-pos’ are used to keep track of historic + values. Unless you implement your own ‘transient-infix-read’ + method you should not have to deal with these slots. + + +File: transient.info, Node: Suffix Slots, Next: Predicate Slots, Prev: Prefix Slots, Up: Classes and Methods + +6.7 Suffix Slots +================ + +Here we document most of the slots that are only available for suffix +objects. Some slots are shared by suffix and group objects, they are +documented in *note Predicate Slots::. + + Also see *note Suffix Classes::. + +6.7.1 Slots of ‘transient-suffix’ +--------------------------------- + + • ‘key’ The key, a key vector or a key description string. + + • ‘command’ The command, a symbol. + + • ‘transient’ Whether to stay transient. See *note Transient + State::. + + • ‘format’ The format used to display the suffix in the popup buffer. + It must contain the following %-placeholders: + + • ‘%k’ For the key. + + • ‘%d’ For the description. + + • ‘%v’ For the infix value. Non-infix suffixes don’t have a + value. + + • ‘description’ The description, either a string or a function that + is called with no argument and returns a string. + +6.7.2 Slots of ‘transient-infix’ +-------------------------------- + +Some of these slots are only meaningful for some of the subclasses. +They are defined here anyway to allow sharing certain methods. + + • ‘argument’ The long argument, e.g. ‘--verbose’. + + • ‘shortarg’ The short argument, e.g. ‘-v’. + + • ‘multi-value’ For options, whether the option can have multiple + values. If non-nil, then default to use + ‘completing-read-multiple’. + + • ‘allow-empty’ For options, whether the empty string is a valid + value. + + • ‘history-key’ The key used to store the history. This defaults to + the command name. This is useful when multiple infixes should + share the same history because their values are of the same kind. + + • ‘reader’ The function used to read the value of an infix. Not used + for switches. The function takes three arguments, PROMPT, + INITIAL-INPUT and HISTORY, and must return a string. + + • ‘prompt’ The prompt used when reading the value, either a string or + a function that takes the object as the only argument and which + returns a prompt string. + + • ‘choices’ A list of valid values. How exactly that is used depends + on the class of the object. + +6.7.3 Slots of ‘transient-variable’ +----------------------------------- + + • ‘variable’ The variable. + +6.7.4 Slots of ‘transient-switches’ +----------------------------------- + + • ‘argument-format’ The display format. Must contain ‘%s’, one of + the ‘choices’ is substituted for that. E.g. ‘--%s-order’. + + • ‘argument-regexp’ The regexp used to match any one of the switches. + E.g. ‘\\(--\\(topo\\|author-date\\|date\\)-order\\)’. + + +File: transient.info, Node: Predicate Slots, Prev: Suffix Slots, Up: Classes and Methods + +6.8 Predicate Slots +=================== + +Suffix and group objects share some predicate slots that control whether +a group or suffix should be available depending on some state. Only one +of these slots can be used at the same time. It is undefined what +happens if you use more than one. + + • ‘if’ Enable if predicate returns non-nil. + + • ‘if-not’ Enable if predicate returns nil. + + • ‘if-non-nil’ Enable if variable’s value is non-nil. + + • ‘if-nil’ Enable if variable’s value is nil. + + • ‘if-mode’ Enable if major-mode matches value. + + • ‘if-not-mode’ Enable if major-mode does not match value. + + • ‘if-derived’ Enable if major-mode derives from value. + + • ‘if-not-derived’ Enable if major-mode does not derive from value. + + One more slot is shared between group and suffix classes, ‘level’. +Like the slots documented above, it is a predicate, but it is used for a +different purpose. The value has to be an integer between 1 and 7. +‘level’ controls whether a suffix or a group should be available +depending on user preference. See *note Enabling and Disabling +Suffixes::. + + +File: transient.info, Node: Related Abstractions and Packages, Next: FAQ, Prev: Classes and Methods, Up: Top + +7 Related Abstractions and Packages +*********************************** + +* Menu: + +* Comparison With Prefix Keys and Prefix Arguments:: +* Comparison With Other Packages:: + + +File: transient.info, Node: Comparison With Prefix Keys and Prefix Arguments, Next: Comparison With Other Packages, Up: Related Abstractions and Packages + +7.1 Comparison With Prefix Keys and Prefix Arguments +==================================================== + +While transient commands were inspired by regular prefix keys and prefix +arguments, they are also quite different and much more complex. + + The following diagrams illustrate some of the differences. + + • ‘(c)’ represents a return to the command loop. + + • ‘(+)’ represents the user’s choice to press one key or another. + + • ‘{WORD}’ are possible behaviors. + + • ‘{NUMBER}’ is a footnote. + +7.1.1 Regular Prefix Commands +----------------------------- + +See *note (elisp)Prefix Keys::. + + ,--> command1 --> (c) + | + (c)-(+)-> prefix command or key --+--> command2 --> (c) + | + `--> command3 --> (c) + +7.1.2 Regular Prefix Arguments +------------------------------ + +See *note (elisp)Prefix Command Arguments::. + + ,----------------------------------, + | | + v | + (c)-(+)---> prefix argument command --(c)-(+)-> any command --> (c) + | ^ | + | | | + `-- sets or changes --, ,-- maybe used --' | + | | | + v | | + prefix argument state | + ^ | + | | + `-------- discards --------' + +7.1.3 Transients +---------------- + +(∩｀-´)⊃━☆ﾟ.*･｡ﾟ + + This diagram ignores the infix value and external state: + + (c) + | ,- {stay} ------<-,-<------------<-,-<---, + (+) | | | | + | | | | | + | | ,--> infix1 --| | | + | | | | | | + | | |--> infix2 --| | | + v v | | | | + prefix -(c)-(+)-> infix3 --' ^ | + | | | + |---------------> suffix1 -->--| | + | | | + |---------------> suffix2 ----{1}------> {exit} --> (c) + | | + |---------------> suffix3 -------------> {exit} --> (c) + | | + `--> any command --{2}-> {warn} -->--| + | | + |--> {noop} -->--| + | | + |--> {call} -->--' + | + `------------------> {exit} --> (c) + + This diagram takes the infix value into account to an extend, while +still ignoring external state: + + (c) + | ,- {stay} ------<-,-<------------<-,-<---, + (+) | | | | + | | | | | + | | ,--> infix1 --| | | + | | | | | | | + | | ,--> infix2 --| | | + v v | | | | | + prefix -(c)-(+)-> infix3 --' | | + | | ^ | + | | | | + |---------------> suffix1 -->--| | + | | ^ | | + | | | | | + |---------------> suffix2 ----{1}------> {exit} --> (c) + | | ^ | | + | | | | v + | | | | | + |---------------> suffix3 -------------> {exit} --> (c) + | | ^ | | + | sets | | v + | | maybe | | + | | used | | + | | | | | + | | infix --' | | + | `---> value | | + | ^ | | + | | | | + | hides | | + | | | | + | `--------------------------<---| + | | | + `--> any command --{2}-> {warn} -->--| | + | | | + |--> {noop} -->--| | + | | | + |--> {call} -->--' ^ + | | + `------------------> {exit} --> (c) + + This diagram provides more information about the infix value and also +takes external state into account. + + ,----sets--- "anything" + | + v + ,---------> external + | state + | | | + | initialized | ☉‿⚆ + sets from | + | | maybe + | ,----------' used + | | | + (c) | | v + | ,- {stay} --|---<-,-<------|-----<-,-<---, + (+) | | | | | | | + | | | v | | | | + | | ,--> infix1 --| | | | + | | | | | | | | | + | | | | v | | | | + | | ,--> infix2 --| | | | + | | | | ^ | | | | + v v | | | | | | | + prefix -(c)-(+)-> infix3 --' | | | + | | ^ | ^ | + | | | v | | + |---------------> suffix1 -->--| | + | | | ^ | | | + | | | | v | | + |---------------> suffix2 ----{1}------> {exit} --> (c) + | | | ^ | | | + | | | | | | v + | | | | v | | + |---------------> suffix3 -------------> {exit} --> (c) + | | | ^ | | + | sets | | | v + | | initialized maybe | | + | | from used | | + | | | | | | + | | `-- infix ---' | | + | `---> value -----------------------------> persistent + | ^ ^ | | across + | | | | | invocations -, + | hides | | | | + | | `----------------------------------------------' + | | | | + | `--------------------------<---| + | | | + `--> any command --{2}-> {warn} -->--| | + | | | + |--> {noop} -->--| | + | | | + |--> {call} -->--' ^ + | | + `------------------> {exit} --> (c) + + • ‘{1}’ Transients can be configured to be exited when a suffix + command is invoked. The default is to do so for all suffixes + except for those that are common to all transients and which are + used to perform tasks such as providing help and saving the value + of the infix arguments for future invocations. The behavior can + also be specified for individual suffix commands and may even + depend on state. + + • ‘{2}’ Transients can be configured to allow the user to invoke + non-suffix commands. The default is to not allow that and instead + warn the user. + + Despite already being rather complex, even the last diagram leaves +out many details. Most importantly it implies that the decision whether +to remain transient is made later than it actually is made (for the most +part a function on ‘pre-command-hook’ is responsible). But such +implementation details are of little relevance to users and are covered +elsewhere. + + +File: transient.info, Node: Comparison With Other Packages, Prev: Comparison With Prefix Keys and Prefix Arguments, Up: Related Abstractions and Packages + +7.2 Comparison With Other Packages +================================== + +7.2.1 Magit-Popup +----------------- + +Transient is the successor to Magit-Popup (see *note +(magit-popup)Top::). + + One major difference between these two implementations of the same +ideas is that while Transient uses transient keymaps and embraces the +command-loop, Magit-Popup implemented an inferior mechanism that does +not use transient keymaps and that instead of using the command-loop +implements a naive alternative based on ‘read-char’. + + Magit-Popup does not use classes and generic functions and defining a +new command type is near impossible as it involves adding hard-coded +special-cases to many functions. Because of that only a single new type +was added, which was not already part of Magit-Popup’s initial release. + + A lot of things are hard-coded in Magit-Popup. One random example is +that the key bindings for switches must begin with "-" and those for +options must begin with "=". + +7.2.2 Hydra +----------- + +Hydra (see <https://github.com/abo-abo/hydra>) is another package that +provides features similar to those of Transient. + + Both packages use transient keymaps to make a set of commands +temporarily available and show the available commands in a popup buffer. + + A Hydra "body" is equivalent to a Transient "prefix" and a Hydra +"head" is equivalent to a Transient "suffix". Hydra has no equivalent +of a Transient "infix". + + Both hydras and transients can be used as simple command dispatchers. +Used like this they are similar to regular prefix commands and prefix +keys, except that the available commands are shown in the popup buffer. + + (Another package that does this is ‘which-key’. It does so +automatically for any incomplete key sequence. The advantage of that +approach is that no additional work is necessary; the disadvantage is +that the available commands are not organized semantically.) + + Both Hydra and Transient provide features that go beyond simple +command dispatchers: + + • Invoking a command from a hydra does not necessarily exit the + hydra. That makes it possible to invoke the same command again, + but using a shorter key sequence (i.e. the key that was used to + enter the hydra does not have to be pressed again). + + Transient supports that too, but for now this feature is not a + focus and the interface is a bit more complicated. A very basic + example using the current interface: + + (transient-define-prefix outline-navigate () + :transient-suffix 'transient--do-stay + :transient-non-suffix 'transient--do-warn + [("p" "previous visible heading" outline-previous-visible-heading) + ("n" "next visible heading" outline-next-visible-heading)]) + + • Transient supports infix arguments; values that are set by infix + commands and then consumed by the invoked suffix command(s). + + To my knowledge, Hydra does not support that. + + Both packages make it possible to specify how exactly the available +commands are outlined: + + • With Hydra this is often done using an explicit format string, + which gives authors a lot of flexibility and makes it possible to + do fancy things. + + The downside of this is that it becomes harder for a user to add + additional commands to an existing hydra and to change key + bindings. + + • Transient allows the author of a transient to organize the commands + into groups and the use of generic functions allows authors of + transients to control exactly how a certain command type is + displayed. + + However while Transient supports giving sections a heading it does + not currently support giving the displayed information more + structure by, for example, using box-drawing characters. + + That could be implemented by defining a new group class, which lets + the author specify a format string. It should be possible to + implement that without modifying any existing code, but it does not + currently exist. + + +File: transient.info, Node: FAQ, Next: Keystroke Index, Prev: Related Abstractions and Packages, Up: Top + +Appendix A FAQ +************** + +A.1 Can I control how the popup buffer is displayed? +==================================================== + +Yes, see ‘transient-display-buffer-action’ in *note Other Options::. + +A.2 Why did some of the key bindings change? +============================================ + +You may have noticed that the bindings for some of the common commands +do *not* have the prefix ‘C-x’ and that furthermore some of these +commands are grayed out while others are not. That unfortunately is a +bit confusing if the section of common commands is not shown +permanently, making the following explanation necessary. + + The purpose of usually hiding that section but showing it after the +user pressed the respective prefix key is to conserve space and not +overwhelm users with too much noise, while allowing the user to quickly +list common bindings on demand. + + That however should not keep us from using the best possible key +bindings. The bindings that do use a prefix do so to avoid wasting too +many non-prefix bindings, keeping them available for use in individual +transients. The bindings that do not use a prefix and that are *not* +grayed out are very important bindings that are *always* available, even +when invoking the "common command key prefix" or *any other* +transient-specific prefix. The non-prefix keys that *are* grayed out +however, are not available when any incomplete prefix key sequence is +active. They do not use the "common command key prefix" because it is +likely that users want to invoke them several times in a row and e.g. +‘M-p M-p M-p’ is much more convenient than ‘C-x M-p C-x M-p C-x M-p’. + + You may also have noticed that the "Set" command is bound to ‘C-x s’, +while Magit-Popup used to bind ‘C-c C-c’ instead. I have seen several +users praise the latter binding (sic), so I did not change it +willy-nilly. The reason that I changed it is that using different +prefix keys for different common commands, would have made the temporary +display of the common commands even more confusing, i.e. after pressing +‘C-c’ all the ‘C-x ...’ bindings would be grayed out. + + Using a single prefix for common commands key means that all other +potential prefix keys can be used for transient-specific commands +*without* the section of common commands also popping up. ‘C-c’ in +particular is a prefix that I want to (and already do) use for Magit, +and also using that for a common command would prevent me from doing so. + + (Also see the next question.) + +A.3 Why does ‘q’ not quit popups anymore? +========================================= + +I agree that ‘q’ is a good binding for commands that quit something. +This includes quitting whatever transient is currently active, but it +also includes quitting whatever it is that some specific transient is +controlling. The transient ‘magit-blame’ for example binds ‘q’ to the +command that turns ‘magit-blame-mode’ off. + + So I had to decide if ‘q’ should quit the active transient (like +Magit-Popup used to) or whether ‘C-g’ should do that instead, so that +‘q’ could be bound in individual transient to whatever commands make +sense for them. Because all other letters are already reserved for use +by individual transients, I have decided to no longer make an exception +for ‘q’. + + If you want to get ‘q’’s old binding back then you can do so. Doing +that is a bit more complicated than changing a single key binding, so I +have implemented a function, ‘transient-bind-q-to-quit’ that makes the +necessary changes. See its doc string for more information. + + +File: transient.info, Node: Keystroke Index, Next: Command Index, Prev: FAQ, Up: Top + +Appendix B Keystroke Index +************************** + + +* Menu: + +* C-g: Aborting and Resuming Transients. + (line 25) +* C-g <1>: Aborting and Resuming Transients. + (line 26) +* C-h: Getting Help for Suffix Commands. + (line 10) +* C-q: Aborting and Resuming Transients. + (line 36) +* C-x C-s: Saving Values. (line 25) +* C-x l: Enabling and Disabling Suffixes. + (line 49) +* C-x s: Saving Values. (line 20) +* C-x t: Common Suffix Commands. + (line 16) +* C-z: Aborting and Resuming Transients. + (line 42) +* M-n: Using History. (line 16) +* M-p: Using History. (line 11) +* M-x transient-resume: Aborting and Resuming Transients. + (line 55) + + +File: transient.info, Node: Command Index, Next: Function Index, Prev: Keystroke Index, Up: Top + +Appendix C Command Index +************************ + + +* Menu: + +* transient-help: Getting Help for Suffix Commands. + (line 10) +* transient-history-next: Using History. (line 16) +* transient-history-prev: Using History. (line 11) +* transient-quit-all: Aborting and Resuming Transients. + (line 36) +* transient-quit-one: Aborting and Resuming Transients. + (line 26) +* transient-quit-seq: Aborting and Resuming Transients. + (line 25) +* transient-resume: Aborting and Resuming Transients. + (line 55) +* transient-save: Saving Values. (line 25) +* transient-scroll-down arg: Other Commands. (line 18) +* transient-scroll-up arg: Other Commands. (line 12) +* transient-set: Saving Values. (line 20) +* transient-set-level: Enabling and Disabling Suffixes. + (line 49) +* transient-suspend: Aborting and Resuming Transients. + (line 42) +* transient-toggle-common: Common Suffix Commands. + (line 16) + + +File: transient.info, Node: Function Index, Next: Variable Index, Prev: Command Index, Up: Top + +Appendix D Function Index +************************* + + +* Menu: + +* transient--do-call: Transient State. (line 98) +* transient--do-exit: Transient State. (line 94) +* transient--do-noop: Transient State. (line 125) +* transient--do-quit-all: Transient State. (line 138) +* transient--do-quit-one: Transient State. (line 132) +* transient--do-replace: Transient State. (line 102) +* transient--do-stay: Transient State. (line 85) +* transient--do-suspend: Transient State. (line 144) +* transient--do-warn: Transient State. (line 121) +* transient--history-init: Prefix Classes. (line 10) +* transient--insert-group: Group Methods. (line 6) +* transient-append-suffix: Modifying Existing Transients. + (line 47) +* transient-args: Using Infix Arguments. + (line 22) +* transient-define-argument: Defining Suffix and Infix Commands. + (line 63) +* transient-define-infix: Defining Suffix and Infix Commands. + (line 27) +* transient-define-prefix: Defining Transients. (line 13) +* transient-define-suffix: Defining Suffix and Infix Commands. + (line 9) +* transient-format: Suffix Format Methods. + (line 6) +* transient-format-description: Suffix Format Methods. + (line 20) +* transient-format-key: Suffix Format Methods. + (line 15) +* transient-format-value: Suffix Format Methods. + (line 25) +* transient-get-suffix: Modifying Existing Transients. + (line 60) +* transient-infix-read: Suffix Value Methods. + (line 17) +* transient-infix-set: Suffix Value Methods. + (line 39) +* transient-infix-value: Suffix Value Methods. + (line 43) +* transient-init-scope: Suffix Value Methods. + (line 57) +* transient-init-value: Suffix Value Methods. + (line 6) +* transient-insert-suffix: Modifying Existing Transients. + (line 42) +* transient-prompt: Suffix Value Methods. + (line 34) +* transient-remove-suffix: Modifying Existing Transients. + (line 56) +* transient-replace-suffix: Modifying Existing Transients. + (line 51) +* transient-scroll-down: Other Commands. (line 18) +* transient-scroll-up: Other Commands. (line 12) +* transient-show-help: Suffix Format Methods. + (line 30) +* transient-suffix-put: Modifying Existing Transients. + (line 65) + + +File: transient.info, Node: Variable Index, Prev: Function Index, Up: Top + +Appendix E Variable Index +************************* + + +* Menu: + +* transient-current-command: Using Infix Arguments. + (line 47) +* transient-current-prefix: Using Infix Arguments. + (line 41) +* transient-current-suffixes: Using Infix Arguments. + (line 32) +* transient-default-level: Enabling and Disabling Suffixes. + (line 38) +* transient-detect-key-conflicts: Other Options. (line 137) +* transient-display-buffer-action: Other Options. (line 46) +* transient-enable-popup-navigation: Other Options. (line 28) +* transient-force-fixed-pitch: Other Options. (line 151) +* transient-highlight-mismatched-keys: Other Options. (line 96) +* transient-history-file: Using History. (line 33) +* transient-history-limit: Using History. (line 38) +* transient-levels-file: Enabling and Disabling Suffixes. + (line 44) +* transient-mode-line-format: Other Options. (line 71) +* transient-read-with-initial-input: Other Options. (line 88) +* transient-show-common-commands: Common Suffix Commands. + (line 23) +* transient-show-popup: Other Options. (line 6) +* transient-substitute-key-function: Other Options. (line 115) +* transient-values-file: Saving Values. (line 30) + + + +Tag Table: +Node: Top751 +Node: Introduction3673 +Node: Usage9460 +Node: Invoking Transients9794 +Node: Aborting and Resuming Transients10826 +Node: Common Suffix Commands13485 +Node: Saving Values15239 +Ref: Saving Values-Footnote-116497 +Node: Using History16767 +Node: Getting Help for Suffix Commands18308 +Node: Enabling and Disabling Suffixes19701 +Node: Other Commands22991 +Node: Other Options23947 +Node: Modifying Existing Transients31071 +Node: Defining New Commands34473 +Node: Defining Transients34809 +Node: Binding Suffix and Infix Commands37240 +Node: Group Specifications38094 +Node: Suffix Specifications41426 +Node: Defining Suffix and Infix Commands45001 +Node: Using Infix Arguments48199 +Node: Transient State50419 +Node: Classes and Methods56292 +Node: Group Classes58506 +Node: Group Methods60422 +Node: Prefix Classes61068 +Node: Suffix Classes62160 +Node: Suffix Methods64404 +Node: Suffix Value Methods64725 +Node: Suffix Format Methods67485 +Node: Prefix Slots68937 +Node: Suffix Slots71412 +Node: Predicate Slots74263 +Node: Related Abstractions and Packages75511 +Node: Comparison With Prefix Keys and Prefix Arguments75798 +Node: Comparison With Other Packages86110 +Node: FAQ90300 +Node: Keystroke Index94034 +Node: Command Index95668 +Node: Function Index97455 +Node: Variable Index101612 + +End Tag Table + + +Local Variables: +coding: utf-8 +End: |